Sticker Application Guide

1. Transfer tape on top of the sticker

2. Vinyl Sticker

3. White backing paper

 

Step 1
Make sure that you clean the area thoroughly with soap and water. Do not use window cleaner or similar products because it will leave a residue behind that will prevent the sticker from adhering well.

 

Step 2
Prepare the sticker for application by firmly rubbing a credit card across the length of the sticker. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.

 

Line up your sticker. Peel away just part of the backing paper at an angle. If the sticker clings to the backing paper, slowly replace the backing paper and firmly rub it with a card again.

 

Place the first part of the transfer tape and sticker and rub it firmly to let it stick. Slowly pull away the backing paper at an angle from underneath as you place the sticker and rub it to ensure it adheres well.

 

Once the sticker is fully adhered, there should be no backing paper left. Give the transfer tape one last rub to ensure optimum adherence of the sticker. Then gently peel off the transfer tape at an angle. If it pulls off the sticker just relay it on top, rub it and re-peel it.